Back to top

QVS 16CH Passive PVD Transceiver Hub with 24 AC 8A PS

Double click on above image to view full picture

Zoom Out
Zoom In

QVS 16CH Passive PVD Transceiver Hub with 24 AC 8A PS

PRODUCT: TPP016VPDPrint

The 16-channel TPP016VPD uses existing CAT5 & RJ45 wiring to carry video and power for simplifying short range installation, centralizing power and reducing installation labor costs. The built in AC24V power supply could support at-distance camera loads up to 500mA per channel. Use with TTP111DP at camera side to send video, and power for cable runs 300 meters (max.).

▶ 16 x RJ45 connector for 16 channel video input + power output
▶ 16 x BNC connector for 16 channel video output to DVR
▶ 24VAC / 0.5 Amp per camera power output (max up to 8 Amp total)
▶ Built in “smart fuse” to avoid current overload
▶ Built in PTC (positive temperature coefficient) for short protection
▶ Built in surge protection
▶ Use with HTA-TTP111VPJ45 video, power transceiver at the camera side
▶ Monochrome video signal up to 500 m, colour video signal up to 300 m

Sorry! This information is currently not available

The 16-channel TPP016VPD uses existing CAT5 & RJ45 wiring to carry video and power for simplifying short range installation, centralizing power and reducing installation labor costs. The built in AC24V power supply could support at-distance camera loads up to 500mA per channel. Use with TTP111DP at camera side to send video, and power for cable runs 300 meters (max.).

▶ 16 x RJ45 connector for 16 channel video input + power output
▶ 16 x BNC connector for 16 channel video output to DVR
▶ 24VAC / 0.5 Amp per camera power output (max up to 8 Amp total)
▶ Built in “smart fuse” to avoid current overload
▶ Built in PTC (positive temperature coefficient) for short protection
▶ Built in surge protection
▶ Use with HTA-TTP111VPJ45 video, power transceiver at the camera side
▶ Monochrome video signal up to 500 m, colour video signal up to 300 m

Sorry! This information is currently not available

  • Description

    The 16-channel TPP016VPD uses existing CAT5 & RJ45 wiring to carry video and power for simplifying short range installation, centralizing power and reducing installation labor costs. The built in AC24V power supply could support at-distance camera loads up to 500mA per channel. Use with TTP111DP at camera side to send video, and power for cable runs 300 meters (max.).

    ▶ 16 x RJ45 connector for 16 channel video input + power output
    ▶ 16 x BNC connector for 16 channel video output to DVR
    ▶ 24VAC / 0.5 Amp per camera power output (max up to 8 Amp total)
    ▶ Built in “smart fuse” to avoid current overload
    ▶ Built in PTC (positive temperature coefficient) for short protection
    ▶ Built in surge protection
    ▶ Use with HTA-TTP111VPJ45 video, power transceiver at the camera side
    ▶ Monochrome video signal up to 500 m, colour video signal up to 300 m

  • Sorry! This information is currently not available

  • Download
  • Sorry! This information is currently not available